Revit Wall Cladding Family – Trim 6

• Parametric: Yes
• Hybrid*: No
• Compatible with: Revit 2016 and higher.
• Family type: Generic Model Line Based
• Materials/textures: Yes
• Approximate file size: 0.90 MB
• File format: .rfa

This Revit Wall Cladding Family – Trim 6 comes with the following customizable parameters and options:

Total height of paneling:

• Minimum height: 2′
• Maximum height: 30′

Change the start and end cuts of this Revit wall cladding family using the Start and End Angle values in the properties.

For example, you can set the value (of Start or End) to 0 if you want 90 degree angles. Or, you can set the value (of Start or End) to 1 if you want an inwards 45 degree cut. If instead, what you need is 45 degree outward cuts, then set the value (of Start or End) to 2.

Finally, you can set it to any other number in case you have an angle that is different than 45 or -45 and change the Manual Start Angle or Manual End Angle to the desired angle. Positive angles go inwards while negative angles go outwards.

• Maximum inward angle: 60 degrees
• Maximum outward angle: -60 degrees

Panel can have multiple or single squares.

NOTE: After being loaded into a project, it can be placed through the Component Tool.

This Revit Wall Cladding Family – Trim 6 comes with a material parameter for:

• Wall Trim

* Hybrid families combine native Revit objects with other 3D applications’ objects for a more realistic look to the families. The objects coming from other 3D applications are configured to NOT have mesh lines (only outlines) and to display in black.

Before purchasing our Revit families and 3D models, make sure you have a software like Winzip or Peazip to unzip files since you will be provided with zip format files.